Vertical PTFE Tube Extrusion Machine PTFE Tube Making Machine PTFE Extruder

Application PFA FEP Tube Making Machine This product is a pipe production line made of PTFE resin through extrusion. The working temperature is -200℃～+200℃. It is mainly used in the production of corrosive level gauges, corrosive liquid and gas delivery pipes, lining pipes, and heat exchanger tubes. This product is a pipe production line made of PTFE resin through extrusion. The working temperature is -200℃～+200℃. It is mainly used in the production of corrosive level gauges, corrosive liquid and gas delivery pipes, lining pipes, and heat exchanger tubes.

Hooha 50+35+30 Chemical Foaming Cable Extrusion Machine Cable Making Machine

Application : It used for lan cable insulation production , capable for foaming process to provide better insulation level . Widely used in Cat 5-7 lan cable , RG series coaxial cable that requires high insulation level .

HH-E-65 Silicone Cable Extrusion Machine

Application This silicone cable extrusion line is applicable for insulation and sheathing extruding for single, 2 cores, 3 cores silicone cables such as power cables, medical cables, control cables etc.

High Speed Power Cable and Wire Extrusion Machine in Electrical Cable Production Line

Application: Be suitable for the extrusion of PVC,PE,PU and other plastic material,mainly applied in the insulation or sheath extrusion of car cable,net wire,power cable,data wire,high frequency wire,building wire,electric wire.Etc.The changed screw is suitable for extrusion of low smoke halogen free,nylon and other plastic material.

25mm ETFR/FEP/PFA Wire and cable extrusion machine Wire making machine cable making equipment

Application： Suitable for Teflon insulation extrusion of ultra-fine coaxial wire or high frequency wire number transmission wire Teflon insulation extrusion and other wire extrusion

cable making machine UV Irradiation Cable and Wire Crosslinking Machine

Application： The technological process of UV Irradiation Cable Crosslinking Equipment is to use UV light as radiation source, mix the mixed photocrosslinking polyolefin ingredients and plastic coating on the conductive wire core, and then immediately enter the special irradiation equipment for molten optical crosslinking. The photo crosslinked polyolefin insulated wire and cable can be obtained by cooling the insulated wire core at different temperatures and other subsequent processing. UV irradiation cable crosslinking equipment only needs to make a little change in the original ordinary extrusion line, put the traction, irradiation box, electrical control cabinet, which covers a small area, can meet the use requirements, the production of UV radiation crosslinking polyzene wire and cable products.

HH-65+150+90 CCV cross-link XLPE triple layer extrusion line

This line is designed for the production of core of 6~35kV, the insulation thickness is below of 12mm, power cables with cross-linking polyethylene (XLPE) insulation. It uses Nitrogen for curing and water for cooling.

HH-25 fluoropolymers cable extrusion machine

Application Suitable for fluoropolymers insulated extrusion of very fine coaxial wire or Teflon insulated extrusion of high-frequency wire and other wire extrusion.

HH-65+40 High speed insulation tandem line

Application: Apply to producing high end data cable such as CAT5E, CAT6, CAT6A . It links with drawing , annealing and extrusion in 1 machine to achieve a high production speed .of 3 times faster than normal core wire insulation .

PLC 50+35 Chemical Foaming Extrusion Machine

Purpose It used in wire insulation extrusion precedure

HH-E-65+35 Physical foaming cable extrusion Machine

Application This silicone cable extrusion line is applicable for insulation and sheathing extruding for single, 2 cores, 3 cores silicone cables such as power cables, medical cables, control cables etc.

HH-E-90 optical fiber cable jacket extrusion machine

Application: This equipment is mainly used for the extrusion of the inner and outer sheath of the optical cable.

HH-E-50 optical fiber secondary coating extrusion line

Application: Mainly used for extruding the loose tube covering the fiber cores (usually 12 cores).Tube material can be PP or PBT.

HH-E-65 Silicone Cable Extrusion Machine

Application This silicone cable extrusion line is applicable for insulation and sheathing extruding for single, 2 cores, 3 cores silicone cables such as power cables, medical cables, control cables etc.

HH-E-100 Silicone Cable Extrusion Machine

Application This silicone cable extrusion line is applicable for insulation and sheathing extruding for single, 2 cores, 3 cores silicone cables such as power cables, medical cables, control cables etc.

HH-E-65+35+30 Physical Foaming Three Layer Co-extrusion Machine

Introduction HH-17 physical foaming tandem line is used for high quality signal cable ,data cable (skin-foam-skin) insulated core wire , adopt high pressure nitrogen inject to foaming in three layer co-extrude production line . Suitable for high requency data cable that inquire foaming insulation , such as lan cable cat 5-8 and other data cable such as RG59 , RG6 .

PLC 50+35 Chemical Foaming Extrusion Machine

Introduction It's used for high quality signal cable ,data cable (skin-foam-skin) insulated core wire , adopt high pressure nitrogen inject to foaming in three layer co-extrude production line . Suitable for high requency data cable that inquire foaming insulation , such as lan cable cat 5-8 and other data cable such as RG59 , RG6 .